Bullet - Proof PMD Adaptor / Extension Cable
Available in 8 inch or 6 foot length
The purpose of this PMD 6.5 diesel relocator kit is to allow you to move your 6.5L truck's PMD/FSD to a cooler location. While the truck's stock wiring is long enough to allow mounting on the manifold (assuming it was replaced in the correct locations following previous repairs), some prefer another location further from engine compartment heat and vibration. These are the most professional 6.5 diesel PMD adapter harnesses on the market. The connector is injection molded (not handmade fiberglass like many) and the quality is equal to factory. Second to none!
Please note that these harnesses are ONLY for use with the Stanadyne Bullet-Proof PMD which is grey in color. This harness is equipped with the correct gold-plated terminals and special connector shape which are necessary for properly adapting the Bullet Proof PMD to an original factory style harness (no need to remove the intake and change the injection harness when using this cable). If you have the original black Stanadyne PMD, or any aftermarket PMD, click HERE to view the correct extension cable for your application.
Installation of this harness is very simple, if you can use an extension cord, you can use this harness! Word to the wise: When choosing a location to relocate your PMD/FSD, please remember that although the top of the engine seems like a "hot" environment, the fan moves a large volume of air across the top of the engine. Any location you choose likewise needs to have a sufficient flow of air or your PMD/FSD will fail prematurely. We have seen the heat sync mounted in the airbox so it is cooled by air coming into the engine. Others have mounted it behind the grill, skidplate, or air intake in the front bumper. Locations that are not advisable are against the firewall, or behind the battery. Many people have successfully employed computer fans or squirrel cage blowers for additional cooling.