6.0L Powerstroke High Pressure Oil Pump with IPR Valve

6.0L Powerstroke Diesel

-6.0 High Pressure Oil Pump -

with IPR Valve
and
STC Upgrade

2004.5 - 2010

Cast Iron Body Pump - fits engine serial numbers after 6,344,943
(The 2004.5 and earlier pump is aluminum and looks totally different - see related items below.)

6.0 diesel high pressure oil pump comes with a 1 Year - Unlimited Mileage Warranty

This 6.0 Powerstroke HPOP listing also includes:

- A new or remanufactured IPR Valve - this is at least a $149.95 value

- Genuine Ford Part Number 4C3Z-9B246F STC Fitting upgrade kit (This kit repairs a design problem with the STC (Snap to Connect) fitting that was a common cause of high pressure oil leaks. The new style fitting is already removed from the kit and installed on the high pressure pump for you. You will receive the remainder of the kit which includes the 6.0 high pressure oil pump cover gasket and other seals and gaskets necessary for installation of your new 6.0L Powerstroke HPOP. - This is a $60 Value

Powerstroke diesel engine parts and accessories used for installation.

6.0 Ford Powerstroke HPOP NOTES:
Failure of this pump is a common issue with the 6.0L Powerstroke.

We very strongly recommend replacing the high pressure oil pump intake screen located in the bottom of the high pressure oil reservoir below the engine oil cooler. In a large majority of cases where the 6.0 diesel high pressure oil pump has failed, we find that the high pressure oil pump screen is torn. If the screen is not replaced, the high pressure oil pump will fail again in a very short period of time. When diagnosing 6.0 Powerstroke high pressure oil pump symptoms, some additional time and effort is required to check and replace the screen - but it will save significant time and money in the long run!

Note: If purchasing for a 2004, please do not order until physically verifying which pump you have. Regardless of what some claim, the only positive way to identify which pump you have on a '04 is by serial number or visual identification.

Please note that a $200 core charge will be added to each 6.0 Powerstroke HPOP order (unless your core is sent ahead - see below). This amount is fully refunded upon the return of a rebuildable pump which has not been disassembled. Cores missing the IPR valve will have a partial reduction in core value. Please contact us if you have any questions.

6.0L Ford Powerstroke Late HPOP w/ IPR

Diagnostic Data and System Teardown Tools

Installing a 6.0L Ford Powerstroke Late HPOP w/ IPR requires accessing the engine valley beneath the turbocharger. A proper diagnosis using shop air prevents you from replacing the wrong components when dealing with a hot engine that refuses to start.

  • Test high-pressure lines for hidden air leaks
  • Upgrade weak factory dummy plugs during the repair
  • Use proper disconnect tools to protect fuel lines
  • Drain residual oil from the cast iron housing

Completing this repair correctly gets your truck running reliably again. Stocking up on essential Powerstroke diesel parts before starting the teardown saves you time.

Call the mechanics at Accurate Technical Services, LLC to order specialized tools or ask installation questions.

Frequently Asked Questions

  • How do I know my high-pressure oil pump is failing?
    A failing pump typically causes a hard start or complete failure to start when the engine reaches normal operating temperature. You might also experience a sudden loss of power while driving. A proper air test confirms if the internal seals blew out before you tear the engine apart.
  • What tools do I need for this replacement?
    This job requires special line disconnect tools to remove the factory pump safely. Using the correct tools helps prevent damage to the oil lines and plastic connectors.
  • Should I replace other parts while the engine is apart?
    Accessing the high-pressure oil system takes significant time because you must remove the turbocharger and intake manifold. Upgrading known weak points like factory standpipes and dummy plugs while the engine is already open prevents you from repeating this heavy labor later.
  • How does the core exchange process work?
    We charge an upfront deposit that is fully refunded when you return your rebuildable old pump within thirty days. You must drain all fluid from the cast iron housing and wrap the unit securely in heavy plastic bags to avoid shipping problems.
Item #: HPOP122X
Availability: In Stock
Usually ships In 1 business day
Price: $569.95


    Update price