Ford 6.9L / 7.3L IDI
Vacuum Regulator Valve Mechanical Conversion Kit
Fits 1983 - 1994
are still tens of thousands of good reliable old IDI Ford Diesels
running around the world - unfortunately, there are some parts that are
getting to be very hard or impossible to find, and the vacuum regulator
valve (VRV) is one of them. The VRV bolts to the side of the injection
pump and receives a mechanical input from the throttle shaft which it
then converts into a variable vacuum signal that serves as an input to the vacuum modulator on the C6 automatic transmission.
vacuum regulator valves are plastic and are easily broken when climbing
around the engine compartment. If your valve is broken or no longer
functioning correctly we have a solution. This kit replaces the vacuum
modulator on the side of the C6 automatic transmission with a mechanical
modulator which is then connected to an included cable that connects to
the throttle shaft on the injection pump. This system is simpler and
more reliable than the original vacuum setup.
The second picture shows an OEM VRV which our unit replaces. There were various designs through the years, so yours may vary somewhat in appearance
Replaces the following part numbers (and others):
Instructions are included.
IMPORTANT: Will NOT Fit 4x4 models equipped with Borg Warner 1350 Transfer Case.