7.3L Powerstroke Injectors
- 7.3L Powerstroke Injectors -
One Year Unlimited Mileage Warranty!
These Powerstroke injectors are remanufactured by one of the most experienced shops in the business with over 30,000 Powerstroke injectors rebuilt to date, and are second to none. Don't shop on price alone when buying HEUI Injectors! New Alliant Power (OE) external o-rings are included. After the rebuilding process, each injector is analyzed on a high-tech test stand. Price is per injector. You may enter the number of injectors you need below. NOTE: We highly recommend that you remove the easier to access valve cover and verify which injectors your truck has since it is vital to install the correct injectors. Please contact us if you have questions.
AA Injector Applications / Part Numbers:
1994 - 1998 Ford F-Series (49 state)
1994 - 1996 Ford F-Series (California)
1994 - 1996 Ford E-Series
1994 - 1996 Navistar T444E
AA Injectors will have one of the following part numbers OR a different part number beginning in "AA"
AB Injector Applications / Part Numbers:
1999 F-Series (49 State) (engines built prior to Dec. 7, 1998)
1997 - 1999 F-Series (California)
1997 - 1999 Navistar T444E Engine Serial Number 460195 - 843889
AD Injector Applications / Part Numbers
1999 - 2003 F-Series and E-Series built after December 1998
T444E engine serial number 843990 and up
Note: Some engines with AD Injectors will use an AE Injector in Cylinder 8
Note: Some vehicles in this year range will use AE Injectors - removing the valve covers for visual inspection is the only way to confirm which injectors you have when dealing with AD/AE Injectors.
AE Injector Applications / Part Numbers
Used in some 1999 - 2003 F-Series and E-Series built after December 1998 in Cylinder 8 ONLY
T444E engine 2002 - 2003 cylinder 8 only
Two very important items to note when you install your new injectors: First, be sure that the copper washer at the tip of each injector is removed when removing the old injector - failure to do this will result in two washers being installed which will cause the injector to be out of position. Also, it is VERY important that the injector hold down bolt be torqued to 120 in-lbs. While the valve covers are off, be sure to inspect the valve cover gaskets, glow plugs, and internal harnesses. All are available here.
PLEASE NOTE: There is an additional $50 core charge added per injector. This core charge will be fully refunded when you ship your old injectors back provided they have not experienced major external damage such as fire, being dropped on the concrete, or being stored outside. Injectors must also be exchanged like for like - i.e. AA cores must be returned for AA injectors. Please be sure you are ordering the right injector! Cores must be returned within 60 days for a full refund.
See related items below for other items commonly needed when replacing injectors.
Please be sure to select desired core option below.